Audio Technica's AT2020PK is the perfect solution for entering the world of podcasting! Complete with a 2020 condenser microphone, ATH-M20x headphones, a desk-mountable boom arm, mic clip, Euro-thread adapter, and carrying pouch; all you need now is the content and platform! But don't stop at the world of podcasting. This is also a fantastic setup for the aspiring vocalist/singer-songwriter, or solo instrumentalist. The AT2020 is a fantastic, value-packed entry-level condenser microphone that's suitable for multiple instruments and sound-design needs! Audio Technica's AT2020PK is the perfect solution for today's myriad recording needs.
Features and specs:
AT2020 Cardioid Condenser Microphone
-
- The price/performance standard in side-address studio condenser microphone technology
-
- High SPL handling and wide dynamic range provide unmatched versatility
-
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
-
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
-
- Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone
ATH-M20x Professional Monitor Headphones
-
- Advanced build quality and engineering
-
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
-
- Tuned for enhanced low-frequency performance
-
- Circumaural design contours around the ears for excellent sound isolation in loud environments
-
- Convenient single-side cable exit
Adjustable Studio Boom Arm
-
- Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
-
- Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
-
- Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm
-
- Internal cable management for clean desk appearance
- Standard 5/8"-27 thread for easy attachment of the included pivoting stand mount
| ELEMENT |
Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN |
Cardioid |
| FREQUENCY RESPONSE |
20-20,000 Hz |
| OPEN CIRCUIT SENSITIVITY |
-37 dB (14.1 mV) re 1V at 1 Pa |
| IMPEDANCE |
100 ohms |
| MAXIMUM INPUT SOUND LEVEL |
144 dB SPL, 1 kHz at 1% T.H.D. |
| NOISE |
20 dB SPL |
| DYNAMIC RANGE (typical) |
124 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO |
74 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS |
48V DC, 2 mA typical |
| WEIGHT |
345 g (12.1 oz) |
| DIMENSIONS |
162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter |
| OUTPUT CONNECTOR |
Integral 3-pin XLRM-type |
| ACCESSORIES FURNISHED |
Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
| AUDIO-TECHNICA CASE STYLE |
R7 |
ATH-M20x Headphones Specifications
Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 – 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8'), straight, left-side exit
Accessories Included: 6.3 mm (1/4") snap-on adapter
