Boss LS-2 Line Selector Pedal

Boss
$149.99
$99.99
(You save $50.00)
Current Stock:
SKU:
LS2
Shipping:
Calculated at Checkout

The LS-2 Line Selector pedal represents the easy way to switch settings among several effects devices or amplifiers, or route input and output signals. Two line loops and six looping modes provide a wide variety of applications.


• Compact line selection pedal for connecting and switching between multiple amplifiers and effects devices
• Provides two line loops with Level control and six looping modes
• Can supply power to several BOSS compact pedals when used with an AC adaptor
• The ideal power supply and master switching unit for multiple effects setups
• BOSS 5-year warranty



SPECIFICATIONS:

Nominal Input Level: -20 dBu

Input Impedance: 1 M ohm

Nominal Output Level: -20 dBu

Output Impedance: 1 k ohms

Recommended Load Impedance: 10 k ohms or greater

Bypass: Buffered bypass

Controls:
MODE selector switch
LEVEL knobs A/B
Pedal switch

Indicator: Line indicator A/B (Used for indication of check battery)

Connectors:
INPUT jack: 1/4-inch phone type
SEND jacks A/B: 1/4-inch phone type
RETURN jacks A/B: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN/OUT jack

Power Supply: Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw: 25 mA

Expected battery life under continuous use: Carbon: Approx. 14 hours
Alkaline: Approx. 30.5 hours
* These figures will vary depending on the actual conditions of use.

INCLUDED ACCESSORIES:
Owner's manual
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Carbon-zinc battery (9 V, 6F22)

Options (sold separately): AC adaptor: PSA series

SIZE AND WEIGHT:
Width: 73 mm, 2-7/8 inches
Depth: 129 mm, 5-1/8 inches
Height: 59 mm, 2-3/8 inches
Weight (including battery): 410 g, 15 oz.