Boss OD-200 Hybrid Drive Pedal

Boss
$359.99
$249.99
(You save $110.00)
Current Stock:
SKU:
OD200
Shipping:
Calculated at Checkout

The OD-200 Hybrid Drive Pedal brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analog/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. Also features an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

• Advanced hybrid design with analog and digital circuitry provides a huge range of drive tones from classic to modern
• Twelve primary drive modes plus 15 boost types with independent pre/post gain controls
• Selectable series or parallel boost structures for unlimited gain shaping
• Advanced gate section for eliminating noise and tightening high-gain tones
• Class-leading sound quality with 32-bit AD/DA, 32-bit floating point processing, and 96 kHz sampling rate
• Access 128 user setups from the panel or MIDI program change
• Recall consecutive memories plus real-time panel setting via footswitch or dedicated panel button
• Panel Lock function disables controls to prevent unwanted changes
• Customizable multi-function footswitches for bypass, boost, memory selection, and more
• Support for expanded control via external footswitches, an expression pedal, or MIDI
• Full MIDI I/O provided with mini TRS jacks (BMIDI-5-35 adaptor cable available separately)
• Micro USB jack for firmware updates
• Runs on PSA-series AC adaptor or three AA-size batteries


SPECIFICATIONS:
Sampling Frequency: 96 kHz

AD/DA Conversion: 32 bits

Processing: 32-bit floating point
Drive Circuit: Analog + Digital

Modes:
12 modes
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory: 127 + Manual

Nominal Input Level: INPUT: -10 dBu
Maximum Input Level: INPUT: +7 dBu
Input Impedance: INPUT: 1 M ohm
Nominal Output Level: OUTPUT: -10 dBu
Maximum Output Level: OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT: 1 k ohms
Recommended Load Impedance: OUTPUT: 10 k ohms or greater

Bypass: Buffered bypass

Controls:
ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button

Display: 7 segments, 3 characters (LED)

Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)

Current Draw: 220 mA

Expected Battery Life Under Continuous Use: Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

INCLUDED ACCESSORIES:
Owner's Manual
Leaflet "USING THE UNIT SAFELY"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
TRS/MIDI cable: BMIDI-5-35

SIZE AND WEIGHT:
Width: 101 mm, 4 inches
Depth: 138 mm, 5-7/16 inches
Height: 63 mm, 2-1/2 inches
Weight: 600 g, 1 lb 8 oz