Boss WL-50 Guitar Wireless System

Boss
$299.99
$219.99
(You save $80.00)
Current Stock:
SKU:
WL50
Shipping:
Calculated at Checkout

The WL-50 Guitar Wireless System makes it easier to bring wireless freedom to your pedalboard. The stompbox-sized receiver fits right alongside your other pedals, and includes a docking port for charging the transmitter and automatically setting the best wireless connection. There's even a DC output, allowing you to distribute power to multiple pedals on your board.

• Plug-and-play wireless system in a stompbox-size format for pedalboards
• Optimum wireless connection set automatically, with no complicated setup required
• Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 65-foot/20-meter range (line-of-sight propagation)*
• Built-in rechargeable battery in transmitter provides up to 12 hours of continuous playing time
• Plug the transmitter into the receiver's docking port for charging and automatic wireless setup**
• Selectable cable tone simulation options: short, long, and bypass
• Receiver powered by optional PSA-S adaptor or two AA batteries
• With PSA-S adaptor power, the receiver's DC output can distribute power to one or more pedals using an optional PCS-20A daisy-chain cable
• Spare WL-T Transmitter available separately
* The transmission range may vary due to local conditions.
** To charge the transmitter, the receiver must be powered via a BOSS PSA-S adaptor. It's also possible to directly charge the transmitter with a standard USB adaptor (5 V/500 mA or higher).

SPECIFICATIONS (RECEIVER):
Wireless Format: BOSS proprietary digital audio format

Wireless carrier frequency: 2.4 GHz

Compatible Channels: 14
(May vary due to local conditions)

Transmission Range: 65 feet line-of-sight
(May vary due to local conditions)

Latency: 2.3 ms

Dynamic Range: 110 dB or greater

Frequency Response: 20 Hz--20 kHz

Nominal Input Level-10 dBu

Input Impedance: 1 M ohm

Nominal Output Level: -10 dBu

Output Impedance: 1 k ohm

Recommended Load Impedance: 10 k ohms or greater

Controls: CABLE TONE switch (OFF/SHORT/LONG)

Indicators:
POWER
RECEIVE

Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
TRANSMITTER jack: 1/4-inch TRS phone type
DC IN jack
DC OUT jack

Power Supply:
Alkaline battery (AA, LR6) x 2
AC adaptor (sold separately)

Current Draw:
During wireless operation: 60 mA
While charging transmitter: 320 mA

Expected battery life under continuous use:
Alkaline battery (AA, LR6): Approximately 10 hours
* These figures will vary depending on the actual conditions of use.

INCLUDED ACCESSORIES:
Owner's Manual
Leaflet USING THE UNIT SAFELY
Transmitter
Rubber foot x 4
Alkaline battery (AA, LR6) x 2

Options (sold separately):
AC adaptor: PSA-S series
Parallel DC cord: PCS-20A (DC Plug x8)
An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T).

SIZE AND WEIGHT (RECEIVER):
Width72 mm
2-7/8 inches
Depth121 mm
4-13/16 inches
Height56 mm
2-1/4 inches
Weight (including battery)220 g
8 oz

SPECIFICATIONS (TRANSMITTER (WL-T)):
Nominal Input Level: -10 dBu (1 M ohm)

Indicator: BATTERY

Connectors:
Input plug: 1/4-inch TRS phone type
DC IN 5 V port: USB Micro-B type

Power Supply:
Rechargeable lithium-ion battery
Supplied from the DC IN 5 V port

Current Draw: 350mA

Battery charging time: Approximately 3 hours

Expected battery life under continuous use:
Approximately 12 hours
* These figures will vary depending on the actual conditions of use.

SIZE AND WEIGHT (TRANSMITTER (WL-T)):
Width: 87 mm, 3-7/16 inches
Depth: 22 mm, 7/8 inches
Height: 36 mm, 1-7/16 inches
Weight: 43 g, 2 oz