Pre-Owned Audio-Technica AT2020USB+PK Streaming and Broadcasting Pack

Audio-Technica
$199.00
$169.15
(You save $29.85)
Current Stock:
1
SKU:
AT2020USBPKUSED
Shipping:
Calculated at Checkout

Audio Technica's AT2020USB+PK is the all-in-one solution for entering the world of podcasting! Complete with a 2020USB condenser microphone, ATH-M20x headphones, a desk-mountable boom arm, mic clip, Euro-thread adapter, and carrying pouch; all you need now is the content and platform! But don't stop at the world of podcasting. This is also a fantastic setup for the aspiring vocalist/singer-songwriter, or solo instrumentalist. The AT2020USB is a fantastic, value-packed entry-level condenser microphone that's suitable for multiple instruments and sound-design needs! The addition of an A/D converter housed in the microphone means you don't have to invest in an interface and it connects to your computer via USB. Also included on the microphone is a headphone jack which will allow you to monitor with zero latency and a volume knob is also present. Audio Technica's AT2020USB+PK has got you covered!

Features and specs:

AT2020USB+ Cardioid Condenser USB Microphone

** Condenser microphone with USB output for digital recording



** High-quality AD converter with 16-bit, 44.1/48 kHz sampling rate for superb audio



** Headphone jack with volume control allows you to monitor the microphone signal with no delay



** Mix control allows you to blend your microphone signal and pre-recorded audio



** High-output internal headphone amplifier delivers superior clarity and musical detail as well as more volume overall



** Smooth, extended frequency response ideally suited for streaming, podcasting, home studio recording, and voiceover use



** Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone



ATH-M20x Professional Monitor Headphones

** Advanced build quality and engineering



** 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils



** Tuned for enhanced low-frequency performance



** Circumaural design contours around the ears for excellent sound isolation in loud environments



** Convenient single-side cable exit



Adjustable Studio Boom Arm

** Full 360° rotation



** Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone



** Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick



** Included USB cable (Type B to Type A) extends 3 m (10') from the base of the boom arm



** Internal cable management for clean desk appearance



* Standard 5/8"-27 thread for easy attachment of the included pivoting stand mount

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20 - 20,000 Hz
POWER REQUIREMENTS USB Power (5V DC)
BIT DEPTH 16 bit
SAMPLE RATE 44.1/48 kHz
VOLUME CONTROL Mix control;
Headphone volume control
WEIGHT 386 g (13.6 oz)
DIMENSIONS 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
OUTPUT CONNECTOR USB-type
HEADPHONE OUTPUT POWER 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
HEADPHONE JACK 3.5 mm (1/8") TRS (stereo)
ACCESSORIES FURNISHED Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch



-------------------------------

ATH-M20x Headphones Specifications
Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 - 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8'), straight, left-side exit
Accessories Included: 6.3 mm (1/4") snap-on adapter