Yamaha EMX7 12 Input Powered Mixer with Dual 710 Watt Amp

Yamaha
$999.00
$749.99
(You save $249.01)
Current Stock:
SKU:
EMX7
Shipping:
Calculated at Checkout

Outline

Bus   Stereo: 1, AUX: 2 (Including FX)
I/OInputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
Phantom power +48 V
Control and others FOOT SWITCH : Effect Mute on/off
Input Channel FunctionInputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
EQ LOW 100 Hz +15 dB / -15 dB (Shelving)
Phantom power +48 V
COMP 1-knob COMP (CH14)
Hi-Z Supported (CH4)
PAD 30 dB (CH1-4)
HPF 80 Hz, -12 dB/oct. (CH13)
EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)
Control and others FOOT SWITCH : Effect Mute on/off
Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)
On-board processorsInputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
EQ LOW 100 Hz +15 dB / -15 dB (Shelving)
Phantom power +48 V
COMP 1-knob COMP (CH14)
Hi-Z Supported (CH4)
DSP SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
PAD 30 dB (CH1-4)
HPF 80 Hz, -12 dB/oct. (CH13)
EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)
Control and others FOOT SWITCH : Effect Mute on/off
Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)
Level Meter   2 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)

General specifications

Frequency response   Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion   Input to SPEAKERS: MIC/LINE =LINE (CH14): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH14): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
On-board amplifiersHPF 80 Hz, -12 dB/oct. (CH13)
EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)
DSP SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
Phantom power +48 V
COMP 1-knob COMP (CH14)
Control and others FOOT SWITCH : Effect Mute on/off
Inputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Maximum output power @8ohms 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W
Maximum output power @4ohms 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)
Hi-Z Supported (CH4)
PAD 30 dB (CH1-4)
EQ LOW 100 Hz +15 dB / -15 dB (Shelving)
Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
Crosstalk   -85 dB (1 kHz, Measured with 1 kHz band pass filter)
Hum & noise levelHPF 80 Hz, -12 dB/oct. (CH13)
EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)
DSP SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
Phantom power +48 V
COMP 1-knob COMP (CH14)
Control and others FOOT SWITCH : Effect Mute on/off
Inputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Equivalent input noise -117 dBu (Noise is measured with A-weighting filter)
Maximum output power @8ohms 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W
Residual output noise Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
Maximum output power @4ohms 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)
Hi-Z Supported (CH4)
PAD 30 dB (CH1-4)
EQ LOW 100 Hz +15 dB / -15 dB (Shelving)
Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
Power requirements   AC 100-240V, 50Hz/60Hz
Power consumption   45 W (Idle) / 250 W (1/8 Power)
Protection circuitHPF 80 Hz, -12 dB/oct. (CH13)
EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)
DSP SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
Load protection DC-fault
Phantom power +48 V
COMP 1-knob COMP (CH14)
Control and others FOOT SWITCH : Effect Mute on/off
Inputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Equivalent input noise -117 dBu (Noise is measured with A-weighting filter)
Maximum output power @8ohms 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W
Residual output noise Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
Maximum output power @4ohms 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)
Hi-Z Supported (CH4)
Amplifier protection Over heat protection, Over current protection, Integral power protection
PAD 30 dB (CH1-4)
Power supply protection Over heat protection, Over current protection
EQ LOW 100 Hz +15 dB / -15 dB (Shelving)
Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
Net weight   9.5 kg (20.9 lbs)
Accessories   Owners Manual, Technical Specifications, AC power cord (2.5 m)
Options   Foot switch: FC5, Rack-mount brackets: RK-EMX7
Others   Operating Temperature : 0 to +40?